EP2000 DINwaveform correction device for DIN Rail applications
Finally, the industry’s most powerful filter is available in a convenient din rail enclosure. The EP-2000 DIN offers waveform correction technology and surge protection for all din rail applications. This provides filtration, waveform correction for other din rail technologies such as motor controls, conveyor control applications, and PLCs. The DIN unit is available in 120V & 240V AC and 12V & 24V DC.
FEATURES AND BENEFITS
– ABSORBS, DISSIPATE & REMOVES with increased capacity
- Transient voltage surges and spikes
- Frequency Noise between 3kHz-1MHz
- Ring waves
– Does NOT shunt energy to the ground
- Uses self healing TMOV and tank circuit to self dissipate energy in the form of heat
– Provides 12.5kA per mode single-pulse surge current
– Reacts to transient in nanoseconds
– Status LED Indicators
– 5 Year Warranty
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 12.5 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
RESPONSE TIME: Instantaneous Key Event Time: Approx. 1 Nanosecond
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Screw Terminals, Max wire Size 12 AWG
MATERIALS: Plastic Housing, LED Indicator Lamps. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
ACCESSORIES: Green LED indicates active phase
DIMENSIONS & WEIGHT: DLength: 3.38″ (86mm), Width: 1.38″ (35mm)
PRODUCT ORDERING GUIDELINES
E P D I N
1L240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Leg 120 |
| Single Leg 240 |
| PROTECT MODE |
|---|
| L-N |
| L-N |
| VPR |
|---|
| 400 |
| 800 |
| SYSTEM CONFIG |
|---|
| 2 Wire + G |
| 2 Wire + G |
| VOLTAGE ID |
|---|
| 1L120 |
| 1L240 |