EP2500EE SeriesPremium residential surge protection and noise filtration

The EP-2050EE, a complete Home Protection, is an industrial electrical surge and noise filtration system adapted for the residential marketplace. The EP2050EE,  SPD+Noise filter, widely accepted by the audiophile market, is designed to protect expensive and sensitive electrical loads in the residential electrical distribution system up to 250A load panels.

FEATURES AND BENEFITS

ABSORBS, DISSIPATE & REMOVES with increased capacity

  • Transient voltage surges and spikes
  • Frequency Noise  between 3kHz-1MHz
  • Ring and combination waves

Does NOT shunt energy to the ground

  • The case ground is used to burn off the noise in the system. Uses self healing Thermal MOV’s along with patented tank circuit to dissipate
    the the residual ringing noise from the MOV circuitry.

Provides 12.5kA per mode single-pulse surge current

Reacts to transient in nanoseconds

Status LED Indicators

5 –Year Warranty

Premium Home Protection Filter, SPD and waveform correction filter

GENERAL SPECIFICATIONS

OPERATING FREQUENCY: 45 – 65 Hz

FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz

MAX SURGE CURRENT: 12.5 kA per mode

MCOV: 20% above rated voltage

SAFETY APPROVALS: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5

SAFETY RATINGS: Fire Rating 94V-0

OPERATING ENVIRONMENT: Approximately -25 C to 65 C

Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond

CONNECTION METHOD: Parallel

PROTECTION MODES: L-N, L-L

STATUS INDICATORS: LED 

COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516

CONNECTION: Wire leads. Size: 14 AWG Length: 3’

MATERIALS: Aluminum Housing, LED Indicator Lamps, 14 AWG 600 V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.

ACCESSORIES: Amber LED indicates active phase

DIMENSIONS & WEIGHT: Diameter: 4.34” Depth: 3.35” Weight: 3 lbs. Compact for easy installation.

PRODUCT ORDERING GUIDELINES

E P 2 0 5 0 E E 

1S240

Voltage Configuration ID

VOLTAGE CONFIGURATIONS:

SYSTEM VOLTAGE
Single Phase 100/200
Single Phase 120/240
PROTECT MODE
L-N, L-L
L-N, L-L
VPR
400, 800
400, 800
SYSTEM CONFIG
3 Wire + G
3 Wire + G
VOLTAGE ID
1S200
1S240

LITERATURE

CUT SHEET
CUT SHEET
INSTALLATION GUIDE
INSTALLATION GUIDE