EP-RPSRack Mounted Power Supply
The EP-RPS is a unique rack mounted power supply, combining several EP product features (surge protection and waveform correction technology) to provide an all-in-one protection unit with isolated power banks. It is conveniently sized for use with standard rack mounted electrical loads such as PDU’s and servers, and but can be used in various situations where a protected power supply is beneficial.
FEATURES AND BENEFITS
- EP-2000 Surge Protection
- EP-2700 High Frequency Filtering
- EP-2750 Ground Filtering
- 15 Amp Breaker Protection (20A optional)
- 6 premium quality receptacle Electrical panels for Power Access Industry standard-sized case
- 12 ethernet protection + filtration
- Rackmount brackets (1 pair)
- LED Digital display with various power parameters
- Up to 3 isolated power banks for noise isolation
Noise Isolation between sensitive electronic loads such as servers and PDU’s (Power Distribution Unit)
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 12.5 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: Circuits built to meet: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond
CONNECTION METHOD: Wall Plug-in
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: Separate LED’s for Ground, SPD and HF Noise filter
COMPLIANCE: NEMA 5-15
CONNECTION: Supplied IEC power cord with Ground
MATERIALS: Aluminum Housing, LED Indicator Lamps, Circuit encapsulated in epoxy to retain integrity of circuitry in failure mode.
ACCESSORIES: Eight Outset electrical panel, Rubber base pads
DIMENSIONS & WEIGHT: Height: 3.75” Depth: 13” Width: 17″ Weight: 12 lbs. Industry standard size for integration with other equipment
PRODUCT ORDERING GUIDELINES
E P R P S
1L240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Leg 120 |
| Single Leg 240 |
| PROTECT MODE |
|---|
| L-N |
| L-N |
| VPR |
|---|
| 400 |
| 400 |
| SYSTEM CONFIG |
|---|
| 2 Wire + G |
| 2 Wire + G |
| VOLTAGE ID |
|---|
| 1L120 |
| 1L240 |