EP-OEM-LSurge Protection and Noise Filtration for Lighting Fixtures
The EP-OEM-L, surge protection device + waveform correction is the industry’s most advanced power quality solution available for lighting fixtures. Its OEM style filter can be integrated into any lighting driver. Equipped with Common Mode, Differential Mode, and patented EP2000 filter, it increases the longevity of your lighting solutions, decreasing maintenance and helping to increase return on investment.
TYPICAL APPLICATIONS
- Street lights, high bay, stadium lighting, commercial lighting fixtures, etc
- Can be applied to any lighting technology such as LEDs, fluorescent, sodium vapor, mercury etc
FEATURES
- Absorbs and dissipates electrical transients and noise
- EP-OEM-L is TMOV protection + 3 different filter topologies (Differential Mode, Common Mode and Waveform Correction)
- Can be integrated to any manufacturers lighting driver
KEY SPECIFICATIONS
CONNECTION METHOD: Series to the circuit. Input to the line, output to the driver
INPUT VOLTAGE RANGE: 0v-277v
INPUT CURRENT: 5A (MAX)
MAX POWER: 600W @ 120Vac; 1200w @ 277Vac
OPERATING FREQUENCY: 45-65 Hz
DIMENSIONS & WEIGHT: 2 1/2 x 11/2 x 1 1/4 inch , 4 Oz
MOUNTING METHOD: Inside the fixture, use mounting tabs
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 12.5 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: Circuit built to meet: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Wire leads. Size: 14 AWG Length: 6 inch
MATERIALS: Plastic Housing, LED Indicator Lamps, 14 AWG 600V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
ACCESSORIES: Amber LED indicates active phase