The EP-LPF is the industry’s most advanced power quality solution available for lighting panels. The patented circuit of the EP-LPF uses innovative technology to protect the expensive lighting solutions from transients and noise, therefore increasing the efficiency of the electrical distribution system. EP-LPF is designed to remove switching noise generated by all kinds of lighting drivers/ballasts.
FEATURES AND BENEFITS
– Specifically designed for your lighting panels.
– Designed by lighting gurus in the industry.
– ABSORBS, DISSIPATE & REMOVES with increased capacity
Transient voltage surges, spikes and ring waves
The frequency noise generated by LED, Induction, Mercury, HID and fluorescent drivers
The noise generated by other loads such as VFDs and inverters
– Does NOT shunt energy to the ground
Uses self-healing TMOV and tank circuit to self dissipate energy in the form of heat
– Provides 80kA per mode single-pulse surge current
– Reacts to transient in nanoseconds
– Status LED Indicators
– 5 Year Warranty
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 80 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: Circuit built to meet: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Wire leads. Size: 14 AWG Length: 3’
MATERIALS: Aluminum Housing, LED Indicator Lamps, 14 AWG 600 V rated Wire. Circuit encapsulated in epoxy to retain integrity of circuitry in failure mode.