EP-LPFLighting Protection Filter
The EP-LPF is the industry’s most advanced power quality solution available for lighting panels. The patented circuit of the EP-LPF uses innovative technology to protect the expensive lighting solutions from transients and noise, therefore increasing the efficiency of the electrical distribution system. EP-LPF is designed to remove switching noise generated by all kinds of lighting drivers/ballasts.
FEATURES AND BENEFITS
– Specifically designed for your lighting panels.
– Designed by lighting gurus in the industry.
– ABSORBS, DISSIPATE & REMOVES with increased capacity
- Transient voltage surges, spikes and ring waves
- The frequency noise generated by LED, Induction, Mercury,
HID and fluorescent drivers - The noise generated by other loads such as VFDs and inverters
– Does NOT shunt energy to the ground
- Uses self-healing TMOV and tank circuit to self dissipate energy in the form of heat
– Provides 80kA per mode single-pulse surge current
– Reacts to transient in nanoseconds
– Status LED Indicators
– 5 Year Warranty
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 80 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: Circuit built to meet: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond
CONNECTION METHOD: Parallel
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Wire leads. Size: 14 AWG Length: 3’
MATERIALS: Aluminum Housing, LED Indicator Lamps, 14 AWG 600 V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
ACCESSORIES: Amber LED indicates active phase
DIMENSIONS & WEIGHT: Rounded Square: 6” Depth: 3.35” Weight: 3 lbs. Compact for easy installation.
PRODUCT ORDERING GUIDELINES
E P L P F
1L240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Phase 120/240 |
| Single Leg 120 |
| Single Leg 240 |
| 3 Phase 120/208 |
| 3 Phase 277/480 |
| 3 Phase 480V |
| PROTECT MODE |
|---|
| L-N, L-L |
| L-N |
| L-N |
| L-N, L-L |
| L-N, L-L |
| L-L |
| VPR |
|---|
| 405, 780 |
| 405 |
| 780 |
| 405, 780 |
| 910, 1350 |
| 1350 |
| SYSTEM CONFIG |
|---|
| 3 Wire + G |
| 2 Wire + G |
| 2 Wire + G |
| 4 Wire + G |
| 4 Wire + G |
| 3 Wire + G |
| VOLTAGE ID |
|---|
| 1S240 |
| 1L120 |
| 1L240 |
| 3Y208 |
| 3Y480 |
| 3D480 |