EP-OEM SPD and Waveform Correction for Every load
The EP-OEM is the industry’s most advanced power quality solution available. The patented circuit of the EP-OEM can integrate into any electrical load’s input power supply, uses innovative technology to increase the efficiency of an electrical distribution system, protecting the connected equipment that drives your process, from home automation to industrial robotics – and everything in between. OEM module is the combination of surge protection device and waveform correction device.
TYPICAL APPLICATIONS
- Control systems, PLCs
- VFD’s, Inverters, UPS, PDU’s
- Lighting Drivers (LEDs, fluorescent, sodium vapor, mercury etc)
- Pretty much any load that needs protection and performance
FEATURES
- Absorbs and dissipates electrical transients and noise
- EP-OEM is TMOV protection + Waveform Correction Filter + Tank circuit to dissipate energy
- Can be integrated to any manufacturers electrical load
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 12.5 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: Circuit built to meet: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Wire leads. Size: 14 AWG Length: 6 inch
MATERIALS: Plastic Housing, LED Indicator Lamps, 14 AWG 600V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
ACCESSORIES: Amber LED indicates active phase
PRODUCT ORDERING GUIDELINES
E P O E M
1L240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Leg 120 |
| Single Leg 240 |
| Single Leg 277 |
| Single Leg 480 |
| Single Phase 120/240 |
| 3 Phase 120/208 |
| 3 Phase 277/480 |
| 3 Phase 240 |
| 3 Phase 480 |
| DC |
| PROTECT MODE |
|---|
| L-N |
| L-N |
| L-N |
| L-N |
| L-N, L-L |
| L-N, L-L |
| L-N, L-L |
| L-N, L-L |
| L-N, L-L |
| + to - |
| SYSTEM CONFIG |
|---|
| 2 Wire |
| 2 Wire |
| 2 Wire |
| 2 Wire |
| 3 Wire |
| 4 Wire |
| 4 Wire |
| 3 Wire |
| 3 Wire |
| 2 Wire |
| VOLTAGE ID |
|---|
| 1S120 |
| 1L240 |
| 1L277 |
| 1L480 |
| 1S240 |
| 3Y208 |
| 3Y480 |
| 3D240 |
| 3D480 |
| Check with us |
| OEM SIZE |
|---|
| 1.5" x 2.0" |
| 1.5" x 2.0" |
| 1.5" x 2.0" |
| 2.0" x 2.0" |
| 3.0" x 3.0" |
| 3.0" x 3.0" or EP-HPF |
| 3.0" x 3.0" or EP-HPF |
| 3.0" x 3.0" or EP-HPF |
| 3.0" x 3.0" or EP-HPF |
| Check with us |