EP2500EE SeriesPremium residential surge protection and noise filtration
The EP-2050EE, a complete Home Protection, is an industrial electrical surge and noise filtration system adapted for the residential marketplace. The EP2050EE, SPD+Noise filter, widely accepted by the audiophile market, is designed to protect expensive and sensitive electrical loads in the residential electrical distribution system up to 250A load panels.
FEATURES AND BENEFITS
ABSORBS, DISSIPATE & REMOVES with increased capacity
- Transient voltage surges and spikes
- Frequency Noise between 3kHz-1MHz
- Ring and combination waves
Does NOT shunt energy to the ground
- The case ground is used to burn off the noise in the system. Uses self healing Thermal MOV’s along with patented tank circuit to dissipate
the the residual ringing noise from the MOV circuitry.
Provides 12.5kA per mode single-pulse surge current
Reacts to transient in nanoseconds
Status LED Indicators
10 –Year Warranty
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 12.5 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond
CONNECTION METHOD: Parallel
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Wire leads. Size: 14 AWG Length: 3’
MATERIALS: Aluminum Housing, LED Indicator Lamps, 14 AWG 600 V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
ACCESSORIES: Amber LED indicates active phase
DIMENSIONS & WEIGHT: Diameter: 4.34” Depth: 3.35” Weight: 3 lbs. Compact for easy installation.
PRODUCT ORDERING GUIDELINES
E P 2 0 5 0 E E
1S240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Phase 100/200 |
| Single Phase 120/240 |
| PROTECT MODE |
|---|
| L-N, L-L |
| L-N, L-L |
| VPR |
|---|
| 400, 800 |
| 400, 800 |
| SYSTEM CONFIG |
|---|
| 3 Wire + G |
| 3 Wire + G |
| VOLTAGE ID |
|---|
| 1S200 |
| 1S240 |