DIGISTRIPPremium grade power strip at your wall outlet
The EP DigiStrip is the perfect combination of an industry-rated surge protection device and waveform correction unit. Equipped with premium-grade 20A outlets, the EP DigiStrip provides protection and performance to your high-end audio-video equipment. EP DigiStrip uses the same circuit as the industry’s most advanced power performance solution available: the EP-2000. The EP DigiStrip provides the innovative, patented circuit of the EP-2000 is a convenient power strip with 4 outlets increases the lifespan and performance of high-end home electronics. The EP DigiStrip will efficiently filter all power pollution threatening your equipment.
FEATURES AND BENEFITS
– ABSORBS, DISSIPATE & REMOVES with increased capacity
- Transient voltage surges and spikes
- Frequency Noise between 3kHz-1MHz
- Ring waves
– Does NOT shunt energy to the ground
- Uses self healing TMOV and tank circuit to self dissipate energy in the form of heat
– Equipped with EMI filters, Common Mode, Differential Mode and patented EP filters. –
– Provides 12.5kA per mode single-pulse surge current\
– Reacts to transient in nanoseconds
– Status LED Indicators
– 1 Year Warranty
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -20 dB/decade roll-off starting at 2.5 kHz
MAX SURGE CURRENT: 12.5 kA per mode
MCOV: 20% above rated voltage
SAFETY APPROVALS: Circuit builts to meet: UL 1449 4th Edition Type 2 SPD, CSA std. c22.2 No. 8-2013 Ed 5
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
Primary Response Time: Instantaneous Key Event Time: Approx. 1 Nanosecond
CONNECTION METHOD: Parallel
PROTECTION MODES: L-N, L-L
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, NEC Surge Suppression Standards, Electrical Notice 516
CONNECTION: Wire leads. Size: 10 AWG Length: 3’
MATERIALS: Aluminum Housing, LED Indicator Lamps, 14 AWG 600 V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
ACCESSORIES: Amber LED indicates active phase
DIMENSIONS & WEIGHT: coming soon
PRODUCT ORDERING GUIDELINES
E P D S
1L240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Leg 120 |
| Single Leg 240 |
| PROTECT MODE |
|---|
| L-N |
| L-N |
| VPR |
|---|
| 400 |
| 400 |
| SYSTEM CONFIG |
|---|
| 2 Wire + G |
| 2 Wire + G |
| VOLTAGE ID |
|---|
| 1L120 |
| 1L240 |