THE EP2700:
- Has a greater than -30 dB reduction from 5 kHz to 2 MHz
- Has a maximum attenuation of greater than -40 dB from 45 kHz to 250 kHz
- Absorbs and dissipates energy within the unit
- Energy is not shunted to the ground. Case ground only
- This unit will not work on the output of a VFD; it will attenuate the control frequency
- Status LED Indicators
- 5 Year Warranty
GENERAL SPECIFICATIONS
OPERATING FREQUENCY: 45 – 65 Hz
FREQUENCY ATTENUATION: -30 dB reduction from 5kHz to 2MHz
SAFETY RATINGS: Fire Rating 94V-0
OPERATING ENVIRONMENT: Approximately -25 C to 65 C
CONNECTION METHOD: Parallel
STATUS INDICATORS: LED
COMPLIANCE: NEMA LS-1, Electrical Notice 516
MATERIALS: Aluminum Housing, LED Indicator Lamps, 14 AWG 600 V rated Wire. Circuit encapsulated in epoxy to retain integrity
of circuitry in failure mode.
CONNECTION: Wire leads. Size: 14 AWG Length: 3’
ACCESSORIES: Red LED indicates FAILURE mode
APPLICATION ENVIRONMENT: Subpanel Distribution, PLC Protection, Buss Plug, Machine Feed, VFD Input Power (Must be used in combination with either EP-2000 or EP-2500)
DIMENSIONS & WEIGHT:
Three- Phase: Length: 6.25″, Width: 6.25″, Height: 4″ Weight: 8 lbs, Mounting Plate: 8.25 x 6.25 x 0.25″
Single- Phase: Length: 4.75″, Width: 4.75″, Height: 3.75″ Weight: 5 lbs, Mounting Plate: 6.75 x 4.75 x 0.25″
PRODUCT ORDERING GUIDELINES
E P 2 7 0 0
1S240
Voltage Configuration ID
VOLTAGE CONFIGURATIONS:
| SYSTEM VOLTAGE |
|---|
| Single Phase 120/240 |
| Single Leg 120 |
| Single Leg 240 |
| 3 Phase 120/208 |
| 3 Phase 277/480 |
| 3 Phase 480V |
| SYSTEM CONFIG |
|---|
| 3 Wire + G |
| 2 Wire + G |
| 2 Wire + G |
| 4 Wire + G |
| 4 Wire + G |
| 3 Wire + G |
| VOLTAGE ID |
|---|
| 1S240 |
| 1L120 |
| 1L240 |
| 3Y208 |
| 3Y480 |
| 3D480 |